Big Green Egg
Temperature Gauge, 3 inch Dial in Dorr Township, MI
MSRP
Product Information
This high quality, stainless steel temperature gauge - with a large, easy-to-read 3 inch dial - precisely monitors the temperatures inside the dome of an EGG, allowing you to achieve and maintain precise cooking temperatures Oversized 3 in (8 cm) Dial Stainless Steel External Temperature Gauge - 117250
- 750F deg / 400C deg
- Works with XXLarge, XLarge, Large, Medium, Small and MiniMax EGGs
- Heavy duty construction, hermetically sealed
- Designed and manufactured in the USA
Installation:
- Carefully insert stem from the outside through small hole in dome of the EGG; the silicone washer should remain on the outside of the EGG.
- Carefully reach inside the dome, and slide retaining clip onto the stem. Squeeze the clip so that it slides easily.
- Slide clip up the stem until the silicone washer -x001F-ts snugly against the exterior of the dome. For accurate reading, thermometer must be installed past the groove on the lower portion of stem as shown below.
This thermometer is calibrated and adjusted at the factory. If you are in high altitudes or wish to check the calibration:
- Bring a clean container of water to a boil.
- Carefully place the end of the thermometer probe into boiling water past the groove on the lower portion of stem. Leave immersed for at least one minute taking care not to let the probe rest on or make contact with the container.
- Boiling point will read 212 deg F/100 deg C at sea level. Boiling point decreases approx 2 deg with each 1000' of altitude. If the thermometer does not read 212 deg F/100 deg C at sea level, calibration can be reset by carefully holding the thermometer head and turning the hex nut with a wrench to move dial in one direction or the other.
- CAUTION - Do not adjust hot thermometer with bare hands!
- CAUTION - Do not hold thermometer with bare hands while placing in boiling water as burns can result!
- CAUTION - Thermometer tip is sharp, do not leave unattended or place within reach of children.
Select a Store
Selected Store
20 locations / In stock at 20
In stock at 19 other locations
MyTown Ace Hardware
1614 142nd Ave
Dorr, MI 49323
Gemmen's Home & Hardware
3488 Kelly Street
Hudsonville, MI 49426
Kingsland Ace Hardware & Rental
(2 Reviews)
6579 28th St SE
Grand Rapids, MI 49546
Great Lakes Ace
(1 Review)
1234 Michigan Street NE
Grand Rapids, MI 49503
Zeeland Ace Hardware
435 W Main Ave
Zeeland, MI 49464
Great Lakes Ace
4300 Remembrance Road NW
Walker, MI 49534
Grand Rapids Ace Hardware
2333 E Beltline Ave NE
Grand Rapids, MI 49525
Bernard's Ace Hardware
1601 W Main St
Lowell, MI 49331
Cronk Ace Hardware
8126 Mason Dr
Newaygo, MI 49337
Darling Ace Hardware
855 W Michigan Ave
Marshall, MI 49068
Ace Hardware
2360 Niles Rd
Saint Joseph, MI 49085
Great Lakes Ace Hardware
600 Frandor Ave
Lansing, MI 48912
Great Lakes Ace - Jackson
(1 Review)
1711 Spring Arbor Rd
Jackson, MI 49203
Vandercook Ace Hardware
4595 Francis St
Jackson, MI 49203
Clouse Reed City Ace Hardware
838 S Chestnut St
Reed City, MI 49677
Rivers Ace Hardware
1071 S Beacon Blvd
Grand Haven, MI 49417
Battle Creek Ace Hardware
30 E Columbia Ave
Battle Creek, MI 49015
Sturgis Ace Hardware
1009 W Chicago Rd
Sturgis, MI 49091
Midwest Ace
7410 E Saginaw Hwy
Haslett, MI 48840
Martin Ace Hardware
103 Crystal Heights Blvd
Middlebury, IN 46540
Directions
Contact
Website
Product Information
This high quality, stainless steel temperature gauge - with a large, easy-to-read 3 inch dial - precisely monitors the temperatures inside the dome of an EGG, allowing you to achieve and maintain precise cooking temperatures Oversized 3 in (8 cm) Dial Stainless Steel External Temperature Gauge - 117250
- 750F deg / 400C deg
- Works with XXLarge, XLarge, Large, Medium, Small and MiniMax EGGs
- Heavy duty construction, hermetically sealed
- Designed and manufactured in the USA
Installation:
- Carefully insert stem from the outside through small hole in dome of the EGG; the silicone washer should remain on the outside of the EGG.
- Carefully reach inside the dome, and slide retaining clip onto the stem. Squeeze the clip so that it slides easily.
- Slide clip up the stem until the silicone washer -x001F-ts snugly against the exterior of the dome. For accurate reading, thermometer must be installed past the groove on the lower portion of stem as shown below.
This thermometer is calibrated and adjusted at the factory. If you are in high altitudes or wish to check the calibration:
- Bring a clean container of water to a boil.
- Carefully place the end of the thermometer probe into boiling water past the groove on the lower portion of stem. Leave immersed for at least one minute taking care not to let the probe rest on or make contact with the container.
- Boiling point will read 212 deg F/100 deg C at sea level. Boiling point decreases approx 2 deg with each 1000' of altitude. If the thermometer does not read 212 deg F/100 deg C at sea level, calibration can be reset by carefully holding the thermometer head and turning the hex nut with a wrench to move dial in one direction or the other.
- CAUTION - Do not adjust hot thermometer with bare hands!
- CAUTION - Do not hold thermometer with bare hands while placing in boiling water as burns can result!
- CAUTION - Thermometer tip is sharp, do not leave unattended or place within reach of children.
Product Reviews
There are no reviews yet for Big Green Egg: Temperature Gauge, 3 inch Dial .
Write a Review
