Big Green Egg
Temperature Gauge, 3 inch Dial in Corbin, KY 40701
MSRP
Product Information
This high quality, stainless steel temperature gauge - with a large, easy-to-read 3 inch dial - precisely monitors the temperatures inside the dome of an EGG, allowing you to achieve and maintain precise cooking temperatures Oversized 3 in (8 cm) Dial Stainless Steel External Temperature Gauge - 117250
- 750F deg / 400C deg
- Works with XXLarge, XLarge, Large, Medium, Small and MiniMax EGGs
- Heavy duty construction, hermetically sealed
- Designed and manufactured in the USA
Installation:
- Carefully insert stem from the outside through small hole in dome of the EGG; the silicone washer should remain on the outside of the EGG.
- Carefully reach inside the dome, and slide retaining clip onto the stem. Squeeze the clip so that it slides easily.
- Slide clip up the stem until the silicone washer -x001F-ts snugly against the exterior of the dome. For accurate reading, thermometer must be installed past the groove on the lower portion of stem as shown below.
This thermometer is calibrated and adjusted at the factory. If you are in high altitudes or wish to check the calibration:
- Bring a clean container of water to a boil.
- Carefully place the end of the thermometer probe into boiling water past the groove on the lower portion of stem. Leave immersed for at least one minute taking care not to let the probe rest on or make contact with the container.
- Boiling point will read 212 deg F/100 deg C at sea level. Boiling point decreases approx 2 deg with each 1000' of altitude. If the thermometer does not read 212 deg F/100 deg C at sea level, calibration can be reset by carefully holding the thermometer head and turning the hex nut with a wrench to move dial in one direction or the other.
- CAUTION - Do not adjust hot thermometer with bare hands!
- CAUTION - Do not hold thermometer with bare hands while placing in boiling water as burns can result!
- CAUTION - Thermometer tip is sharp, do not leave unattended or place within reach of children.
Select a Store
Selected Store
21 locations / In stock at 21
In stock at 20 other locations
W. D. Bryant & Son Inc
1405 S Main Street
Corbin, KY 40701
W.D. Bryant & Sons Inc
372 South 5th St
Williamsburg, KY 40769
Smith Ace Hardware
116 East Central Ave
La Follette, TN 37766
Berea Ace Hardware
292 Mini Mall Drive
Berea, KY 40403
Potter's Ace Hardware
215 Main Street
Rocky Top, TN 37769
Ace Hardware of Clinton
929 N Charles G Seivers Blvd
Clinton, TN 37716
Elder's Ace Hardware of Halls
6950 Maynardville Pike
Knoxville, TN 37918
Potters Ace Hardware
1345 S Hwy 127
Albany, KY 42602
Potter's Ace Hardware
1511 Knoxville Hwy
Wartburg, TN 37887
Elder's Ace Hardware of Bearden
(1 Review)
150 N Forest Park Blvd
Knoxville, TN 37919
Ace Hardware of Harrodsburg
(2 Reviews)
920 N College Street
Harrodsburg, KY 40330
Elder's Ace Hardware of South Knoxville
4219 Chapman Hwy
Knoxville, TN 37920
Elder's Ace Hardware of Rocky Hill
7511 S North Shore Dr
Knoxville, TN 37919
Ace Hardware
3120 Pimlico Pkwy
Lexington, KY 40517
Elder's Ace Hardware of Dixie Lee
19670 Highway 11 East
Lenoir City, TN 37772
Kingston Ace Hardware
615 N Kentucky St
Kingston, TN 37763
Potter's Ace Hardware
2121 South Roane Street
Harriman, TN 37748
Curt's Ace Hardware
232 W Broadway
Newport, TN 37821
W.D. Bryant & Son Inc.
1413 S Main Street
London, KY 40741
Curt's Ace Hardware
7516 Asheville Hwy
Knoxville, TN 37924
Great Lakes Ace Hardware
170 Bellerive Blvd
Nicholasville, KY 40356
Directions
Contact
Website
Product Information
This high quality, stainless steel temperature gauge - with a large, easy-to-read 3 inch dial - precisely monitors the temperatures inside the dome of an EGG, allowing you to achieve and maintain precise cooking temperatures Oversized 3 in (8 cm) Dial Stainless Steel External Temperature Gauge - 117250
- 750F deg / 400C deg
- Works with XXLarge, XLarge, Large, Medium, Small and MiniMax EGGs
- Heavy duty construction, hermetically sealed
- Designed and manufactured in the USA
Installation:
- Carefully insert stem from the outside through small hole in dome of the EGG; the silicone washer should remain on the outside of the EGG.
- Carefully reach inside the dome, and slide retaining clip onto the stem. Squeeze the clip so that it slides easily.
- Slide clip up the stem until the silicone washer -x001F-ts snugly against the exterior of the dome. For accurate reading, thermometer must be installed past the groove on the lower portion of stem as shown below.
This thermometer is calibrated and adjusted at the factory. If you are in high altitudes or wish to check the calibration:
- Bring a clean container of water to a boil.
- Carefully place the end of the thermometer probe into boiling water past the groove on the lower portion of stem. Leave immersed for at least one minute taking care not to let the probe rest on or make contact with the container.
- Boiling point will read 212 deg F/100 deg C at sea level. Boiling point decreases approx 2 deg with each 1000' of altitude. If the thermometer does not read 212 deg F/100 deg C at sea level, calibration can be reset by carefully holding the thermometer head and turning the hex nut with a wrench to move dial in one direction or the other.
- CAUTION - Do not adjust hot thermometer with bare hands!
- CAUTION - Do not hold thermometer with bare hands while placing in boiling water as burns can result!
- CAUTION - Thermometer tip is sharp, do not leave unattended or place within reach of children.
Product Reviews
There are no reviews yet for Big Green Egg: Temperature Gauge, 3 inch Dial .
Write a Review
