Big Green Egg
Temperature Gauge, 2 inch Dial in Temple, GA 30179
MSRP
Product Information
This high quality, stainless steel temperature gauge - with an easy-to-read dial - precisely monitors the temperatures inside the dome of an EGG, allowing you to achieve and maintain precise cooking temperatures 2 in Dial Stainless Steel External Temperature Gauge - 117236
- 750F deg / 400C deg
- Works with XXLarge, XLarge, Large, Medium, Small and MiniMax EGGs
- Heavy duty construction, hermetically sealed
- Designed and manufactured in the USA
Installation:
- Carefully insert stem from the outside through small hole in dome of the EGG; the silicone washer should remain on the outside of the EGG.
- Carefully reach inside the dome, and slide retaining clip onto the stem. Squeeze the clip so that it slides easily.
- Slide clip up the stem until the silicone washer -x001F-ts snugly against the exterior of the dome. For accurate reading, thermometer must be installed past the groove on the lower portion of stem as shown below.
This thermometer is calibrated and adjusted at the factory. If you are in high altitudes or wish to check the calibration:
- Bring a clean container of water to a boil.
- Carefully place the end of the thermometer probe into boiling water past the groove on the lower portion of stem. Leave immersed for at least one minute taking care not to let the probe rest on or make contact with the container.
- Boiling point will read 212 deg F/100 deg C at sea level. Boiling point decreases approx 2 deg with each 1000' of altitude. If the thermometer does not read 212 deg F/100 deg C at sea level, calibration can be reset by carefully holding the thermometer head and turning the hex nut with a wrench to move dial in one direction or the other.
- CAUTION - Do not adjust hot thermometer with bare hands!
- CAUTION - Do not hold thermometer with bare hands while placing in boiling water as burns can result!
- CAUTION - Thermometer tip is sharp, do not leave unattended or place within reach of children.
Select a Store
Selected Store
52 locations / In stock at 52
In stock at 51 other locations
Temple Ace Hardware
275 W Hwy 78
Temple, GA 30179
Dallas Ace Hardware
780 Seaboard Dr.
Dallas, GA 30132
Bolster Hardware - Douglasville
6530 Church St
Douglasville, GA 30134
Brookstone Ace Hardware
1715 Dennis Kemp Lane
Kennesaw, GA 30152
Cartersville Ace Hardware
924 West Ave
Cartersville, GA 30120
New Era Hardware
1733 Washington Road
East Point, GA 30344
Smith Ace
2900 Delk Rd SE
Marietta, GA 30067
Wall's Ace Hardware
2932 Canton Rd
Marietta, GA 30066
West Paces Ace Hardware
3535 Northside Pkwy NW
Atlanta, GA 30327
Bates Ace Hardware
1709 Howell Mill Rd
Atlanta, GA 30318
Ace Hardware of East Rome
610 Shorter Ave
Rome, GA 30165
Morgan's Ace Hardware
7337 Main St
Woodstock, GA 30188
Ace Hardware of Toco Hills
2983 N Druid Hills Rd NE
Atlanta, GA 30329
Intown Ace Hardware
1404 Scott Blvd
Decatur, GA 30030
Dunwoody Village Ace Hardware
1316 Dunwoody Village Pkwy
Dunwoody, GA 30338
Chamblee Ace Hardware
5446 Peachtree Blvd
Chamblee, GA 30341
Handy Ace Hardware
3969 Lawrenceville Hwy
Tucker, GA 30084
Ace Hardware Woodmont
8026 Cumming Hwy
Canton, GA 30115
Ace of Griffin
126 W College Street
Griffin, GA 30224
ACE Hardware of Lawrenceville
880 Dogwood Rd
Lawrenceville, GA 30044
Ace Hardware of McDonough
1750 Hwy 81 E
McDonough, GA 30252
Cowan Hardware Company
1264 Green Street SE
Conyers, GA 30012
Cowan Hardware Company
1056 Honey Creek Rd SE
Conyers, GA 30013
Ace Hardware Hwy 20
2000 Canton Hwy
Cumming, GA 30040
Artistic Builders Supply Ace
963 Buford Dr C
Lawrenceville, GA 30043
Marble Hill Ace Hardware
26 McCain Pass
Marble Hill, GA 30148
S & S Ace Hardware & Mower
4160 Buford Drive
Buford, GA 30518
Ace Hardware Hammonds
4715 Hammond Industrial Dr
Cumming, GA 30041
Handy Ace Hardware
2684 Winder Hwy
Dacula, GA 30019
Mayfield Ace Hardware
2171 Elm St.
Covington, GA 30014
Keith's Ace Hardware (formerly Dalton Ace)
2105 E Walnut Ave
Dalton, GA 30721
Weather's Ace Hardware
10055 Alabama Hwy 168
Boaz, AL 35957
Pell City Ace
2640 Martin Street S
Pell City, AL 35128
Ace Hardware of Monticello
9120 GA-212 West
Monticello, GA 31064
Monroe Ace Hardware
703 W Spring St
Monroe, GA 30655
Ace Hardware of Forsyth
171 N Lee St
Forsyth, GA 31029
Autry's Ace Hardware
3540 Thompson Bridge Road
Gainesville, GA 30506
Elder's Ace Hardware of Varnell
4158 GA-2
Dalton, GA 30721
University Ace Hardware
2102 East University Dr
Auburn, AL 36830
Sylacauga Ace Hardware
214 W Fort Williams St
Sylacauga, AL 35150
Elder's Ace Hardware of Ringgold
100 Helpful Place
Ringgold, GA 30736
Home Ace Hardware
7390 Blackmon Rd
Columbus, GA 31909
Elder's Ace Hardware - Trenton
11665 S Main St
Trenton, GA 30752
Watson Brothers Patio and Hearth
1799 Ogletree Road
Auburn, AL 36830
Lake Guntersville Ace Hardware
1536 Blount Ave
Guntersville, AL 35976
Weathers Hardware Appliance
109 2nd Ave E
Oneonta, AL 35121
Ace Hardware of Acworth
5195 N Main Street
Acworth, GA 30101
Crabapple Ace Hardware
12350 B-1 Arnold Mill Rd
Alpharetta, GA 30004
Union Grove Ace Hardware
2250 Hwy 155 N
McDonough, GA 30252
Brother Ace Hardware
3204 Hwy 155 South
Locust Grove, GA 30248
Ace Hardware of Zebulon
9215 US-19
Zebulon, GA 30295
Grayson Ace Hardware
2178 Britt Street
Grayson, GA 30017
Product Information
This high quality, stainless steel temperature gauge - with an easy-to-read dial - precisely monitors the temperatures inside the dome of an EGG, allowing you to achieve and maintain precise cooking temperatures 2 in Dial Stainless Steel External Temperature Gauge - 117236
- 750F deg / 400C deg
- Works with XXLarge, XLarge, Large, Medium, Small and MiniMax EGGs
- Heavy duty construction, hermetically sealed
- Designed and manufactured in the USA
Installation:
- Carefully insert stem from the outside through small hole in dome of the EGG; the silicone washer should remain on the outside of the EGG.
- Carefully reach inside the dome, and slide retaining clip onto the stem. Squeeze the clip so that it slides easily.
- Slide clip up the stem until the silicone washer -x001F-ts snugly against the exterior of the dome. For accurate reading, thermometer must be installed past the groove on the lower portion of stem as shown below.
This thermometer is calibrated and adjusted at the factory. If you are in high altitudes or wish to check the calibration:
- Bring a clean container of water to a boil.
- Carefully place the end of the thermometer probe into boiling water past the groove on the lower portion of stem. Leave immersed for at least one minute taking care not to let the probe rest on or make contact with the container.
- Boiling point will read 212 deg F/100 deg C at sea level. Boiling point decreases approx 2 deg with each 1000' of altitude. If the thermometer does not read 212 deg F/100 deg C at sea level, calibration can be reset by carefully holding the thermometer head and turning the hex nut with a wrench to move dial in one direction or the other.
- CAUTION - Do not adjust hot thermometer with bare hands!
- CAUTION - Do not hold thermometer with bare hands while placing in boiling water as burns can result!
- CAUTION - Thermometer tip is sharp, do not leave unattended or place within reach of children.
Product Reviews
There are no reviews yet for Big Green Egg: Temperature Gauge, 2 inch Dial .
Write a Review