Big Green Egg
Temperature Gauge, 2 inch Dial in Somerset, KY
MSRP
Product Information
This high quality, stainless steel temperature gauge - with an easy-to-read dial - precisely monitors the temperatures inside the dome of an EGG, allowing you to achieve and maintain precise cooking temperatures 2 in Dial Stainless Steel External Temperature Gauge - 117236
- 750F deg / 400C deg
- Works with XXLarge, XLarge, Large, Medium, Small and MiniMax EGGs
- Heavy duty construction, hermetically sealed
- Designed and manufactured in the USA
Installation:
- Carefully insert stem from the outside through small hole in dome of the EGG; the silicone washer should remain on the outside of the EGG.
- Carefully reach inside the dome, and slide retaining clip onto the stem. Squeeze the clip so that it slides easily.
- Slide clip up the stem until the silicone washer -x001F-ts snugly against the exterior of the dome. For accurate reading, thermometer must be installed past the groove on the lower portion of stem as shown below.
This thermometer is calibrated and adjusted at the factory. If you are in high altitudes or wish to check the calibration:
- Bring a clean container of water to a boil.
- Carefully place the end of the thermometer probe into boiling water past the groove on the lower portion of stem. Leave immersed for at least one minute taking care not to let the probe rest on or make contact with the container.
- Boiling point will read 212 deg F/100 deg C at sea level. Boiling point decreases approx 2 deg with each 1000' of altitude. If the thermometer does not read 212 deg F/100 deg C at sea level, calibration can be reset by carefully holding the thermometer head and turning the hex nut with a wrench to move dial in one direction or the other.
- CAUTION - Do not adjust hot thermometer with bare hands!
- CAUTION - Do not hold thermometer with bare hands while placing in boiling water as burns can result!
- CAUTION - Thermometer tip is sharp, do not leave unattended or place within reach of children.
Select a Store
Selected Store
20 locations / In stock at 20
In stock at 19 other locations
Berea Ace Hardware
292 Mini Mall Drive
Berea, KY 40403
Ace Hardware of Harrodsburg
(2 Reviews)
920 N College Street
Harrodsburg, KY 40330
Smith Ace Hardware
116 East Central Ave
La Follette, TN 37766
Ace Hardware
3120 Pimlico Pkwy
Lexington, KY 40517
Tompkinsville Ace Hardware
702 N Main Street
Tompkinsville, KY 42167
Old Town Ace Hardware
1448 North Broad St
Tazewell, TN 37879
Ace Hardware of Clinton
929 N Charles G Seivers Blvd
Clinton, TN 37716
Cave City Ace Hardware
9586 Happy Valley Rd
Cave City, KY 42127
Potters Ace Hardware
33 Woodgate Dr
Crossville, TN 38571
Potters Ace Hardware
615 W Main Street
Algood, TN 38506
Potters Ace Hardware
786 Sparta Hwy
Crossville, TN 38572
Potter's Ace Hardware
2121 South Roane Street
Harriman, TN 37748
Elder's Ace Hardware of Hardin Valley
(1 Review)
10009 Hardin Valley Rd
Knoxville, TN 37932
Potters Ace Hardware
325 Newman Dr
Cookeville, TN 38501
Kingston Ace Hardware
615 N Kentucky St
Kingston, TN 37763
Somerset Ace Hardware
370 S Hwy 27
Somerset, KY 42501
W.D. Bryant & Son Inc.
1413 S Main Street
London, KY 40741
Potters Ace Hardware
205 Livingston Ave
Jamestown, TN 38556
Great Lakes Ace Hardware
170 Bellerive Blvd
Nicholasville, KY 40356
Tri-County Hardware
1110 E Tri County Blvd
Oliver Springs, TN 37840
Directions
Contact
Website
Product Information
This high quality, stainless steel temperature gauge - with an easy-to-read dial - precisely monitors the temperatures inside the dome of an EGG, allowing you to achieve and maintain precise cooking temperatures 2 in Dial Stainless Steel External Temperature Gauge - 117236
- 750F deg / 400C deg
- Works with XXLarge, XLarge, Large, Medium, Small and MiniMax EGGs
- Heavy duty construction, hermetically sealed
- Designed and manufactured in the USA
Installation:
- Carefully insert stem from the outside through small hole in dome of the EGG; the silicone washer should remain on the outside of the EGG.
- Carefully reach inside the dome, and slide retaining clip onto the stem. Squeeze the clip so that it slides easily.
- Slide clip up the stem until the silicone washer -x001F-ts snugly against the exterior of the dome. For accurate reading, thermometer must be installed past the groove on the lower portion of stem as shown below.
This thermometer is calibrated and adjusted at the factory. If you are in high altitudes or wish to check the calibration:
- Bring a clean container of water to a boil.
- Carefully place the end of the thermometer probe into boiling water past the groove on the lower portion of stem. Leave immersed for at least one minute taking care not to let the probe rest on or make contact with the container.
- Boiling point will read 212 deg F/100 deg C at sea level. Boiling point decreases approx 2 deg with each 1000' of altitude. If the thermometer does not read 212 deg F/100 deg C at sea level, calibration can be reset by carefully holding the thermometer head and turning the hex nut with a wrench to move dial in one direction or the other.
- CAUTION - Do not adjust hot thermometer with bare hands!
- CAUTION - Do not hold thermometer with bare hands while placing in boiling water as burns can result!
- CAUTION - Thermometer tip is sharp, do not leave unattended or place within reach of children.
Product Reviews
There are no reviews yet for Big Green Egg: Temperature Gauge, 2 inch Dial .
Write a Review
