Big Green Egg
Temperature Gauge, 2 inch Dial in Haslett, MI
MSRP
Product Information
This high quality, stainless steel temperature gauge - with an easy-to-read dial - precisely monitors the temperatures inside the dome of an EGG, allowing you to achieve and maintain precise cooking temperatures 2 in Dial Stainless Steel External Temperature Gauge - 117236
- 750F deg / 400C deg
- Works with XXLarge, XLarge, Large, Medium, Small and MiniMax EGGs
- Heavy duty construction, hermetically sealed
- Designed and manufactured in the USA
Installation:
- Carefully insert stem from the outside through small hole in dome of the EGG; the silicone washer should remain on the outside of the EGG.
- Carefully reach inside the dome, and slide retaining clip onto the stem. Squeeze the clip so that it slides easily.
- Slide clip up the stem until the silicone washer -x001F-ts snugly against the exterior of the dome. For accurate reading, thermometer must be installed past the groove on the lower portion of stem as shown below.
This thermometer is calibrated and adjusted at the factory. If you are in high altitudes or wish to check the calibration:
- Bring a clean container of water to a boil.
- Carefully place the end of the thermometer probe into boiling water past the groove on the lower portion of stem. Leave immersed for at least one minute taking care not to let the probe rest on or make contact with the container.
- Boiling point will read 212 deg F/100 deg C at sea level. Boiling point decreases approx 2 deg with each 1000' of altitude. If the thermometer does not read 212 deg F/100 deg C at sea level, calibration can be reset by carefully holding the thermometer head and turning the hex nut with a wrench to move dial in one direction or the other.
- CAUTION - Do not adjust hot thermometer with bare hands!
- CAUTION - Do not hold thermometer with bare hands while placing in boiling water as burns can result!
- CAUTION - Thermometer tip is sharp, do not leave unattended or place within reach of children.
Select a Store
Selected Store
51 locations / In stock at 51
In stock at 50 other locations
Great Lakes Ace - Jackson
(1 Review)
1711 Spring Arbor Rd
Jackson, MI 49203
Great Lakes Ace - Brighton
9868 E Grand River
Brighton, MI 48116
Great Lakes Ace - Chelsea
(1 Review)
1103 S Main St
Chelsea, MI 48118
Great Lakes Ace
15146 N Holly Rd
Holly, MI 48442
Ace Hardware of Grand Blanc
12901 S Saginaw St
Grand Blanc, MI 48439
Great Lakes Ace - Highland
2850 E Highland Rd
Highland, MI 48356
Great Lakes Ace Hardware
412 S Main St
Brooklyn, MI 49230
ACE Barnes Hardware
2105 W Stadium Blvd
Ann Arbor, MI 48103
Hemlock Ace Hardware
171 E Saginaw Rd
Hemlock, MI 48626
Bernard's Ace Hardware
1601 W Main St
Lowell, MI 49331
Ace Barnes Hardware
3352 Washtenaw Ave
Ann Arbor, MI 48104
Ace Hardware of Commerce
3050 Union Lake Rd
Commerce Twp, MI 48382
Ace Hardware of Clarkston
(2 Reviews)
6669 Dixie Highway
Clarkston, MI 48346
_2021-07-15-19-43-02.png){kind=logo}
Great Lakes Ace Hardware
41800 W 10 Mile Rd
Novi, MI 48375
Great Lakes Ace - Waterford
5070 Highland Rd
Waterford, MI 48327
Great Lakes Ace Hardware
5591 Sashabaw Rd
Clarkson, MI 48346
Great Lakes Ace Hardware
44441 W. Ann Arbor Rd.
Plymouth, MI 48170
Great Lakes Ace Hardware
37133 6 Mile Rd
Livonia, MI 48152
Great Lakes Ace Hardware
33021 Grand River Ave
Farmington Hills, MI 48336
Kingsland Ace Hardware & Rental
(2 Reviews)
6579 28th St SE
Grand Rapids, MI 49546
Great Lakes Ace Hardware
584 N Lapeer Rd
Lake Orion, MI 48362
Great Lakes Ace - Westland
31059 Ann Arbor Trail
Westland, MI 48185
Great Lakes Ace
3271 South Blvd
Auburn Hills, MI 48326
Great Lakes Ace - Adrian
1525B W Maumee St
Adrian, MI 49221
Great Lakes Ace Hardware
(1 Review)
3182 Walton Blvd
Rochester Hills, MI 48309
Great Lakes Ace
132 Merriman Rd
Westland, MI 48186
Beverly Hills Ace Hardware
17670 W 13 Mile Rd
Beverly Hills, MI 48025
Grand Rapids Ace Hardware
2333 E Beltline Ave NE
Grand Rapids, MI 49525
Great Lakes Ace
29201 Greenfield Rd
Southfield, MI 48076
Great Lakes Ace Hardware
1404 Walton Blvd
Rochester Hills, MI 48309
Great Lakes Ace
(1 Review)
1234 Michigan Street NE
Grand Rapids, MI 49503
Great Lakes Ace Hardware
149 E 14 Mile Rd
Clawson, MI 48017
Great Lakes Ace
23135 Ecorse Rd
Taylor, MI 48180
Great Lakes Ace Hardware
52891 Shelby Rd
Shelby Township, MI 48316
Tony's Ace Hardware
24011 John R Rd
Hazel Park, MI 48030
Great Lakes Ace Hardware
15819 Southfield Rd
Allen Park, MI 48101
Great Lakes Ace - Warren
3830 E 13 Mile Rd
Warren, MI 48092
Great Lakes Ace
4300 Remembrance Road NW
Walker, MI 49534
Gemmen's Home & Hardware
3488 Kelly Street
Hudsonville, MI 49426
Great Lakes Ace
15162 E 13 Mile Rd
Warren, MI 48088
Great Lakes Ace Hardware
3080 Van Horn Rd.
Trenton, MI 48183
Great Lakes Ace
31001 Harper Ave
Saint Clair Shores, MI 48082
Great Lakes Ace Hardware
18165 Mack Ave
Detroit, MI 48224
Zeeland Ace Hardware
435 W Main Ave
Zeeland, MI 49464
Cronk Ace Hardware
8126 Mason Dr
Newaygo, MI 49337
Wauseon Ace Hardware
1495 N Shoop Ave
Wauseon, OH 43567
Midwest Ace
7410 E Saginaw Hwy
Haslett, MI 48840
Okemos Ace Hardware
3544 Meridian Crossings Dr
Okemos, MI 48864
Townline Ace Hardware
424 W Main Street
Flushing, MI 48433
Battle Creek Ace Hardware
30 E Columbia Ave
Battle Creek, MI 49015
Sturgis Ace Hardware
1009 W Chicago Rd
Sturgis, MI 49091
Directions
Contact
Website
Product Information
This high quality, stainless steel temperature gauge - with an easy-to-read dial - precisely monitors the temperatures inside the dome of an EGG, allowing you to achieve and maintain precise cooking temperatures 2 in Dial Stainless Steel External Temperature Gauge - 117236
- 750F deg / 400C deg
- Works with XXLarge, XLarge, Large, Medium, Small and MiniMax EGGs
- Heavy duty construction, hermetically sealed
- Designed and manufactured in the USA
Installation:
- Carefully insert stem from the outside through small hole in dome of the EGG; the silicone washer should remain on the outside of the EGG.
- Carefully reach inside the dome, and slide retaining clip onto the stem. Squeeze the clip so that it slides easily.
- Slide clip up the stem until the silicone washer -x001F-ts snugly against the exterior of the dome. For accurate reading, thermometer must be installed past the groove on the lower portion of stem as shown below.
This thermometer is calibrated and adjusted at the factory. If you are in high altitudes or wish to check the calibration:
- Bring a clean container of water to a boil.
- Carefully place the end of the thermometer probe into boiling water past the groove on the lower portion of stem. Leave immersed for at least one minute taking care not to let the probe rest on or make contact with the container.
- Boiling point will read 212 deg F/100 deg C at sea level. Boiling point decreases approx 2 deg with each 1000' of altitude. If the thermometer does not read 212 deg F/100 deg C at sea level, calibration can be reset by carefully holding the thermometer head and turning the hex nut with a wrench to move dial in one direction or the other.
- CAUTION - Do not adjust hot thermometer with bare hands!
- CAUTION - Do not hold thermometer with bare hands while placing in boiling water as burns can result!
- CAUTION - Thermometer tip is sharp, do not leave unattended or place within reach of children.
Product Reviews
There are no reviews yet for Big Green Egg: Temperature Gauge, 2 inch Dial .
Write a Review
